Zippy M1W4-6D50P

8456012

alle Bilder, all pictures...

1350W

Server,Workstation,Storage System,Communication,Networking

340.00x426.00x42.00  (mm) 13.39x16.77x1.65  (inch)   VOLTAGE:  100V ~ 240VAC (WITH ± 10% TOLERANCE) FREQUENCY: 47Hz ~ 63Hz  INPUT CURRENT: 20-10A MAX AT ANY LOW/HIGH INPUT VOLTAGE                        INRUSH CURRENT: 60/100A @ 115/230VAC (25℃) POWER FACTOR CORRECTION: 95% @ 110V, FULL LOAD   Output Voltage Output Current Min. Output Current Max. Output Current Peak Regulation Load Regulation Line Output Ripple & Noise Max.[P-P] 5V 6.0 84.50   ± 5% ± 50mV 70mV 12V 6.0 90   ± 6 ± 50mV  120mV  -5V 0.2 1.20   +5%, -10%  ± 50mV 120mV  -12V 0.2 1.20   +5%, -10% ± 50mV  120mV  3.3V 3.5 67.5   ± 5% ± 50mV  70mV  +5VSB 0.4 3.5   +5%, -6% ± 50mV  70mV  ‧TEMPERATURE RANGE: OPERATING: 0℃ --- 40℃ STORAGE: -20℃ --- 80℃ ‧HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95% ‧REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS ‧HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE ‧DIELECTRIC WITHSTAND: INPUT / OUTPUT 1500 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND ‧EFFICIENCY: 67% TYPICAL AT 115VAC FULL LOAD POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms ‧OVER POWER PROTECTION: 110% ~ 150% ‧OVER VOLTAGE PROTECTION: +5V ->5.7V ~ 6.5V, 3.3V -> 3.9V ~ 4.7V,+12V -> 13.3V ~ 14.3V ‧OVER CURRENT PROTECTION: 110% ~ 180% ‧SHORT CIRCUIT PROTECTION: +5V, -5V, +12V, -12V, +3.3V ‧EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A ‧SAFETY: UL 1950, CSA 22.2 NO/ 950, TÜV IEC 950   Zippy Homepage

x